VCI PAPER MEETS MILITARY SPECIFICATIONS




    Military Grades are on the U.S. Dept. of Defense Qualified Products List (QPL) for military specification MIL-PRF-3420 (Packaging Materials, Volatile Corrosion Inhibitor Treated, Opaque)

Nox-Rust Vapor Wrapper
V W 35 H

        35 lb / 57 gsm

        Natural neutral kraft

        Treated one side one side with VCI

        U.S. Department of Defense approved Daubert VCI

        Nitrite-free volatile corrosion inhibitor formulation

Approved by the Department of Defense  AND

Is on the Qualified Products List (QPL) for MIL-PRF-3420H, Class 3, Style A, Form b. (Light duty, kraft, flat carrier impregnated with corrosion inhibitor.)

V W 35HC

        35 lb / 57gsm

        Creped neutral kraft

        Medium duty Class 2, Style B, Form b

        Nitrite-free

 

       Click here to purchase 36 inch x 600 feet long VW35H Mil Spec Paper Rolls

 

VW60H Class 2, Style A Form B and Style B Form B

60 lb./ream (98 g/m2) natural kraft, saturated one side with U.S. Dept of Defence approved Daubert Cromwell nitrite-free volatile corrosion inhibitor (VCI) formulation. Approved by the Dept. of Defense and on the Qualified Products List (QPL) for Mil-P-3420H, Class 2, Style A, Form b. (Medium duty, kraft, flat carrier impregnated with corrosion inhibitor.)

       Click here to purchase 36 inch x 600 feet long VW60H Mil Spec Paper Rolls

 

VW70H  Class 1, Style A, Form B

Mil Prf-3420 G Class 1 Style A Form B VCI paper 36 inch wide x 200 yards per roll This mil spec paper packaging is on the Qualified Products List for VCI paper military use

       Click here to purchase 36 inch x 600 feet long VW70H-36 Mil Spec Paper Rolls

 

VERSIL-PAK WRAPPER MIL-B-121, TYPE 1 and 2, Grade C, Class 1 and 2

Used in the protection of underground pipe of all sizes in combination with protective coating. Due to its flexibility which makes possible effective application over irregular surfaces.  It is especially suited for hand application. A protective coating is obtained which will give long time service and is especially recommended for reconditioning work.

VERSIL-PAK is also recommended for the protection of industrial plant piping where corrosion action is prevalent or where conditions are extremely severe. This includes air lines, sprinkling system piping, cold water piping, and gas piping.

Versil-Pak 5 is of military grade and complies to the requirements of Military Specification MIL-B-121, TYPE 1, Grade C, Class 1 and class 2 material

Versil-Pak 3 complies to the requirements of Military Specification MIL-B-121, TYPE 2, Grade C, Class 1 and class 2 material

  Click here to view our Versil-Pak grade of VCI paper in stock and available for purchase.

| VCI SELECTION HELP | Free evaluation of your corrosion control requirements | Selection Guide | VCI Additives Oil | Chemical Descriptions | Coatings | Cleaning / Degreasing | VCI Plastic | Polymer MB | Industrial Quick List | Daubert VCI Emitters | Electrical | Hydrotesting | Lay Up & Storage | Military Specs | Mothballing | Catalogs Index | VCI Packaging | Tower Layup | VCI Degreaser | Water Treatment | Corrosion Protection Slide Shows | Safe Rust Remover | Steel Coil Protection | Quotations | Biodegradable Products | Antistatic | Corrosion Control Canada | Mobile Site | VCI Emitter FAQ | Delivery Systems | Terms |