Corrosion Control Removable Coatings

Nox-Rust 7800 corrosion coating & lubricant

• VCI temporary coating & lubricant for indoor, packaged and outdoor sheltered environments
• Up to 12 months corrosion protection
• Excellent lubricant for fine components even at very low temperatures
• Fed Spec VV-L-800 and performs to Mil-PRF-32033

5 Gallons

• Nox-Rust 9300 rinse additive & temporary indoor or outdoor sheltered (packaged) metals
• Corrosion inhibitor for ferrous metals and phosphate treated parts
• Concentrated, can be diluted with water or petroleum solvents
• Water displacing corrosion inhibitor can be applied by brush, spray, dip or flow coat

Nox-Rust 9800 VCI liquid is a ready to use, water-soluble and water removable, vapor corrosion inhibitor

• Use during long term storage or seasonal lay-up
• It is fogged into the interior metal surfaces of enclosed spaces such as turbines, heat exchangers, boilers, tanks, piping systems, heating & cooling systems
• The thin, protective film dissolves on contact with water or steam and provides additional corrosion protection
• No special interior surface preparation required as the VCI will find and protect hard-to-reach areas as necessary

Nox Rust 9900 Aqueous Clear Outdoor/indoor barrier corrosion control coating

• Environmentally safe, non-flammable
• Water based barrier VCI coating for bare metal parts or industrial finishes
• Dries to a crystal clear dry to touch finish
• Apply to parts at 60 F plus degrees
• 5 Gallons
• Also available in 55 gallon drums

Nox-Rust 9900 Data

V-870CB Electrospray
Provides cleaning action and corrosion protection to electronics & electrical panels, circuits, contacts and all metal surfaces inside an enclosure. Ships ground only. Non-conductive ultra thin molecular corrosion protection.

Military Approved NSN 6850-32-076-1186

6 x 500 Mil Bottles/Carton Ships Ground O-RMD