Water Treatment for Corrosion Control

| Slide Show Presentations | Corrosion Control | Water Treatment for Lay Up | Oil Additives | VCI Selection Help |

 

Boiler Lay-Up Pre-measured VCI Powder in Bags

For seasonal lay up of water boilers.  VCI water soluble powder in a pre-measured poly bag.  Use 1 bag (3.5 pounds of powder) per 3.8 cubic meters or per 134 cubic feet.  (1,000 gallon or less boiler capacity) Empty contents of bag into boiler for dry lay up preservation.  100 % biodegradable treatment system.

 

VCI-1 Powder  Powder for Ferrous Metals & Aluminum

More Information

Use for cooling tower and boiler wet lay-up or in an operational boiler for continuous corrosion prevention in the contact, vapor and interface phase.  Water soluble self metering, biodegradable, safe boiler corrosion control.  Usage is 0.5 - 2 % by weight of water. Package:  5 , 50 or 100 Pound Containers

 

VCI Powder Powder for Ferrous Metals Hydrotesting

More Information

VCI-1 Powder is readily soluble in water. Very economical for protecting large enclosures and piping and for hydro testing. Nitrite and chromate free, non-polluting.
Package: VCI Powder Corrosion Inhibitor in:   5 lbs. (2.28 kg), 50 lbs. (22.7 kg), 100 lbs. (45.5 kg).

 

Nox-Rust 1200  Water-based Liquid Concentrate Corrosion Inhibitor

More Information

Nox-Rust 1200 provides continuous long and short-term corrosion protection for ferrous metals and is compatible with copper, brass and galvanized steel. Corrosion inhibitor (VCI)  solution designed to protect the interior metal surfaces of enclosed systems, such as boilers, tanks, turbines, heat exchangers, steam or condensate pipelines.  Used for extended periods of equipment inactivity, during storage or lay-up and during hydrostatic testing.Package: 5 gallons (19 liters) and 55 gallons (208 liters)

 

Nox-Rust 1010 VCI Powder for Dry Fogging, Wet Applied or Wet Lay-Up of Process Water Equipment

More Information
VCI Powder additive for ferrous metals is compatible with non-ferrous metals.

VCI 1010 powder is a water soluble rust preventive concentrate for dry or wet applied corrosion preventative for ferrous metals, compatible with non-ferrous metals.   It leaves a very thin, transparent, tack-free mono-molecular film on the metal surface. Weld-able and paint-able film that is non-toxic, pro-environmental and contains no nitrite or phosphate inhibitors. Package: 5, 25 or 150 pound containers

 

Nox-Rust 9800  Water-based Corrosion Inhibitor for Fog or Spray into Enclosed Systems

More Information
VCI Liquid Designed for Dry Lay Up of Enclosed Systems

Daubert Nox-Rust 9800 is a water soluble liquid designed for the dry lay up , short term shut downs and corrosion protection storage of enclosed tanks, process water equipment, turbines and other water system equipment. Removal is NOT required as the thin protective VCI film dissolves in water when the equipment is put back into service.
Package: 5 gallons (19 liters) and 55 gallons (208 liters).

 

Vappro 848 Water Soluble Multi-Metal Powder for Wet Lay Up, Fill & Flush, Dry Fog or Spray into Enclosed Systems

More Information
Multi Metal Water Soluble VCI Powder Additive or DRY Layup of Towers Tanks & Boilers

Vappro 848 Powder protects ferrous and non ferrous metals with a variety of application methods. Removal is normally NOT required as the protective corrosion inhibitors are water soluble and non hazardous. Provides protection up to 2 years. Package: Varies

 

Boiler Water Corrosion Inhibitor Powder Additives

In production, storage tanks, hydrocarbon processing, working boilers and steam lines that are in service. Multi-metal corrosion control.  Package: 5 pounds, 50 pounds, 100 pounds

 

VCI Powder Catalog Download the adobe file.

 

Hydrotesting Additives

 A full range of Corrosion Protection additives and hydrotesting solutions including:

 

Antiscalant Rust Remover

General purpose water treatment anti-scalant. Removes rust & corrosion.Non-flammable and non-hazardous and non-toxic. No neutralizing required. Operates at a pH of 6.2 Contain corrosion inhibitors.
Package: 1 gallon and 5 gallons.

 

Defoamer

Defoamer for aqueous and oil-water systems. Specially selected for use in combination with water-based and oil-based inhibiting systems. Stable under both acidic and basic conditions. Silicone free.
Package: 5 gallons (19 liters) and 55 gallons (208 liters)


| Pressure Testing Additives Application Rates | VCI Powder | Season Shutdown Corrosion Protection |

| VCI SELECTION HELP | Free evaluation of your corrosion control requirements | Selection Guide | VCI Additives Oil | Chemical Descriptions | Coatings | Cleaning / Degreasing | VCI Plastic | Polymer MB | Industrial Quick List | Daubert VCI Emitters | Electrical | Hydrotesting | Lay Up & Storage | Military Specs | Mothballing | Catalogs Index | VCI Packaging | Tower Layup | VCI Degreaser | Water Treatment | Corrosion Protection Slide Shows | Safe Rust Remover | Steel Coil Protection | Quotations | Biodegradable Products | Antistatic | Corrosion Control Canada | Mobile Site | VCI Emitter FAQ | Delivery Systems | Terms |